What desktop computer would you recommend me to use godot or other video and image editing programs?

Blender does not require a mid end graphics processor. It can run just fine with an integrated GPU. However it can definitely benefit from a more powerful GPU, especially ones that can support ray tracing. And let's not forget to mention memory. The more memory you have, the more easily your computer can handle multiple processes/apps.

Honestly, there's a lot more to it than what we are describing. There are plenty of resources online to help you choose a PC. Like this one. https://www.ebuyer.com/desktop-pc-buying-guide

It depends on how fast a PC you want/need. I have an integrated graphics card, and it really isn't bad for Godot. It has almost no impact on blender, except if I have a really detailed mesh(~1 million tris). I've never noticed any lag with other specs, though some things in the engine might benefit from higher specs(e.g. load times). I have a pretty average PC, and I run Godot & blender just fine:

CPU: Intel Core i5-4210U CPU @ 1.70GHz(usually runs at 2.50GHz) RAM: 8GB DDR3 HDD: 1TB HDD GPU: Intel HD Graphics 4400(about as slow as graphics cards go)

These specs are perfectly acceptable, the main thing for me is the graphics card. Keep in mind that you can replace parts on a desktop. If you see a good deal on a PC, you can get that and then replace just the graphics card if the graphics card isn't enough.

You are probably better off just listing some kind of a budget so we can make recommendations derived from that.

Something else to keep in mind with buying a new computer right now is that Nvidia and AMD have new graphics cards in the works that will (hopefully) be released later this year. If you can, waiting a little bit might not be a bad idea from a GPU perspective. The newer graphics cards will then be available if you want the latest technology, and the older graphics cards will become cheaper (especially as people sell their old cards to buy new ones). That said, there are likely going to be delays due to what is happening around the world right now, so... yeah. Might be something to consider.

Though, as SIsilicon28 said, there is a lot that goes into buying a computer. Additionally, what constitutes as a good computer varies from person to person. I would recommend following PC buying guides like the one linked above and doing other research to figure out what would work best for you, your use cases, and your budget. The only thing I would recommend is measuring the given PC dimensions before buying the computer to make sure it fits into wherever you plan to put it. I have learned that the hard way once or twice :#

A budget would be good. Also, do you want a pre-built machine or are you putting together yourself?

What I did was get an intel i3 for pretty cheap, and that's been a few years ago. Then I put a decent video card in it rather than the integrated one it came with. If you get a built in one, I would recommend AMD, rather than intel. They are a bit faster with graphics and usually a little cheaper. I used one before this and it ran blender, etc, just fine. One of the advantages of getting a low end computer is you know it will run on most people's systems.

Is it better to assemble it to pieces or buy the pc already assembled?

If you don't know how to build a computer, buying a pre-built will definitely be easier (but will cost a little more than doing it yourself). I always build from scratch, but I've also been doing it for a long time. If you are up to learn it's not so hard, it can take a few hours to a day to build, though will require careful research first. Depends what you are looking for.

Pre-built comes at the extra cost of service for the assembly. If you don't mind having to assemble it yourself it is cheaper to build it yourself. The cost difference would depend where you are buying from. It is likely to be the difference of either getting extra memory, a CPU with extra cores or extra storage.

So if you are willing to watch some videos on youtube about how to assemble the computer yourself then you can squeeze a little bit more out of your budget. Tell us the budget you are willing to spend and if you are willing to assemble it yourself and we will either recommend some kind of pre-built or create a parts list on pcpartpicker.com for you.

Or if you have a specific store you want to buy everything from then just link us the store.

Yes, a budget and a preferred store (and/or the region you are in) and I could maybe recommend some things.

I'm not sure how much you are looking to spend, but you'll probably spend at least $800 on a pre-built, maybe closer to $1,200 to get something good. If you build yourself, you can either lower the cost, or build a better computer for the same amount of money, but we're still talking about at least $700 for entry level.

I already know it. Why I’m going to wait for black friday so it's worth less money

@david8184 said: I already know it. Why I’m going to wait for black friday so it's worth less money Because you save money on computer components and in the end you save $ 100

What components do you recommend for me to manufacture a computer myself quality / price? I would like to spend less than $ 1200 and more or less I want a $ 1,000 PC that works very well and has a lot of speed for photo and video editing or 3D editing. But if it is worth less money it is better that I assemble myself and buy the components that I prefer to assemble myself.

Something like this would be pretty decent and fits your budget. https://pcpartpicker.com/guide/hpkcCJ/great-amd-gaming-build

I didn't put that together myself, it was one of the presets on pcpartpicker. Basically the AMD Ryzen CPUs are best now, the 3600 or up would be good. An AM4 motherboard, make sure it supported the 3000 series, some of the older ones may not or may need an upgrade. AMD 5700 is a good video card, or 5700 XT for a bit more money. 16GB of RAM at least, 32GB would be great but it not needed for most things. 1TB SSD, depending on how many files/games you expect to have, an additional 2TB HDD could be useful. I'd probably get a 650W PSU just in case you want to upgrade later you'll have some breathing room.

But they don't send it to the Canary Islands

You may have to buy from a local company, but I imagine most of those parts should be available.